10 Best Grill Mat For Concrete Patio

Updated on: September 2020

Best Grill Mat For Concrete Patio in 2020


Grill Mat and Fire Pit Mat (38"). Deck, Patio, Lawn Protector, Huge 38" Fire Pit Pad Deck Protector with 50 Pieces Bamboo Marshmallow Sticks

Grill Mat and Fire Pit Mat (38
BESTSELLER NO. 1 in 2020
  • ✔️ LIFETIME GUARANTEE: For added durability FIRE SHIELD heat deflector pad is designed to last. It's fully braided, so no worry about wearing.- GUARANTEED FOR LIFE
  • ✔️ BEST HEAT RESISTANCE IN INSDUSTRY – Our Fire Pit Pad deck protector has a heat resistance rating of up to 1300 degrees Fahrenheit!
  • ✔️ PATIO, LAWN, DECK PROTECTOR – Whether your surface is wood, composite, stone, concrete or grass you can be rest assured our Firepad will protect your patio surface from burns, heat damage, heat deformation, grease spills, cement stains and more!
  • ✔️ 3-LAYER PROTECTIVE FABRIC - Keep the heat resistant side to the top, soft side to the bottom to provide your deck or lawn surface from burns, heat damage, spills or splatter
  • ✔️ Beware of imitation products. When it comes to fire protection, an inferior product can be downright dangerous

GrillTex Under the Grill Protective Deck and Patio Mat, 39 x 72 inches

GrillTex Under the Grill Protective Deck and Patio Mat, 39 x 72 inches
BESTSELLER NO. 2 in 2020
  • GRILLTEX UNDER THE GRILL MAT: Measuring 39 inches by 72 inches, this protective mat stays safely in place under your grill to collect any spills and splatters.
  • SURFACE PROTECTION: Protect your deck, patio, or garage floor from water, sauce, grease, and oil. 100% recycled rubber provides a protective barrier without staining the surface underneath.
  • HEAT RESISTANT: Synthetic rubber provides heat resistance up to 500 degrees Fahrenheit.
  • EASY TO CLEAN: When ready to clean, simply rinse with soap and water or a garden hose.
  • 1 YEAR WARRANTY: 1 year limited warranty against failure due to manufacturing defects. Warranty is limited to replacement of the defective mat only.

Cuisinart CGMT-300 Premium Deck and Patio Grill Mat, 65” x 36

Cuisinart CGMT-300 Premium Deck and Patio Grill Mat, 65” x 36
BESTSELLER NO. 3 in 2020
  • DURABLE: The 65" x 35" mat is weather resistant and made from 100% durable PVC material.
  • PROTECTION: Protect your deck and patio from grease, spills and stains.
  • EASY CLEAN: To clean the mat, simply spray it down with a garden hose and it is ready for its next use.

Indoor - Outdoor - Cleaning Supplies - Bathroom Accessories - Shower Cleaner - Bathtub - Bath Mat - Garden - Patio - Stone - Concrete - Bird Bath - Grill Accessories - BBQ - Grill Brush - BBQ Brush

Indoor - Outdoor - Cleaning Supplies - Bathroom Accessories - Shower Cleaner - Bathtub - Bath Mat - Garden - Patio - Stone - Concrete - Bird Bath - Grill Accessories - BBQ - Grill Brush - BBQ Brush
BESTSELLER NO. 4 in 2020
  • Each brush color has its own stiffness and recommended applications (see our color chart).
  • The Yellow Medium brush is perfect for bathroom, bathtub, shower, tile, and porcelain cleaning.
  • The Red Stiff brush is for the garage, garden, concrete, stone, and outdoor cleaning applications.
  • The Ultra Stiff Black brush is used on grills, furnaces, smokers, and other scrubbing applications.
  • All brushes feature rugged steel, quarter-inch, quick-change shafts. Fits drills AND drivers.

Fasmov Grill Mat Grill and Garage Protective Mat, 3 Feet x 4 Feet

Fasmov Grill Mat Grill and Garage Protective Mat, 3 Feet x 4 Feet
BESTSELLER NO. 5 in 2020
  • Made from flexible PVC material, waterproof
  • Size: 3 Feet x 4 Feet
  • Easy to clean, simply wash with water
  • You can DIY your grill mat according to your Grill, protects your floor from grease, oil, rust etc.
  • Great for ensuring your deck & patio are safe from oil & grease damage

Fasmov 36 x 50 inches Under The Grill Protective Deck and Patio Mat

Fasmov 36 x 50 inches Under The Grill Protective Deck and Patio Mat
BESTSELLER NO. 6 in 2020
  • Measuring 36 inches by 50 inches, this protective mat stays safely in place under your grill to collect any spills and splatters.
  • Made of friendly PVC free fabric blend absorbs and collects liquids, stain resistant and durable waterproof backing prevents messes from soaking through to other surfaces, with a neutral charcoal color that looks great on any surface and with most grills
  • Easy to Clean: When ready to clean, simply rinse with soap and water or a garden hose.
  • Easy to roll up for compact storage during the off season Neutral charcoal material looks great on any surface and with most grills
  • Surface Protection: Protect your deck, patio, or garage floor from water, sauce, grease, and oil.

Newtex FirePad Deck Protector 24'', Fireproof Mat for Fire Pit Backyard Camping Grill Lawn Patio, Deck Heat Shield, Deck Defender, BBQ Mat, Grill Mat, Fire Retardant/Resistant Pad for Outdoors

Newtex FirePad Deck Protector 24'', Fireproof Mat for Fire Pit Backyard Camping Grill Lawn Patio, Deck Heat Shield, Deck Defender, BBQ Mat, Grill Mat, Fire Retardant/Resistant Pad for Outdoors
BESTSELLER NO. 7 in 2020
  • Z-Flex technology protects your deck or patio by reflecting heat
  • Z-Block technology provides flame and hot charcoal burn protection
  • Available in 2 sizes: 24" or 36" diameter
  • Designed and manufactured in the United States by Newtex
  • Beware of imitation products. When it comes to fire protection, an inferior product can be downright dangerous. Newtex has more than 40 years of experience in high temperature fabrics and fire protection. Trust the experts.

Resilia - Grill and Garage Protective Mat - Decorative Embossed Diamond Plate Pattern - Black, (3 Feet x 4 Feet)

Resilia - Grill and Garage Protective Mat - Decorative Embossed Diamond Plate Pattern - Black, (3 Feet x 4 Feet)
BESTSELLER NO. 8 in 2020
  • HEAVY DUTY PROTECTION: Flame retardant, flexible PVC vinyl protects your floor from grease, oil, charcoal, rust, and more
  • EASY CLEAN-UP: Simply wash with water and it appears brands new again
  • LONG-LASTING: Made with heavy duty, water-proof polypropylene for long-lasting durability indoors and out
  • ECO-FRIENDLY: Made with flexible PVC vinyl that is phthalate free, DINP free, and from recycled materials - Does not contain any Prop 65 regulated contaminants
  • MADE IN USA: Family owned and operated; produced entirely in the USA

Under The Grill Protective Deck and Patio Mat, 36 x 54 inches, Use This Absorbent Grill Pad Floor Mat for Your BBQ Grilling Gear Gas Electric Grill Without Grease Splatter and Other Messes

Under The Grill Protective Deck and Patio Mat, 36 x 54 inches, Use This Absorbent Grill Pad Floor Mat for Your BBQ Grilling Gear Gas Electric Grill Without Grease Splatter and Other Messes
BESTSELLER NO. 9 in 2020
  • Dossetop under the grill mat: measuring 36 inches by 54 inches, this protective mat stays safely in place under your grill to collect any spills, splatters and other messes.
  • Surface protection: Protect your deck, patio, or garage floor from water, sauce, grease, and oil. 100% recycled plastic bottles provides a protective barrier without staining The surface underneath.
  • NON-SLIP WATER-PROOF BACKING: Our non-slip, skid resistant backing keeps the grill mat in place and prevents it from moving around. The waterproof layer traps any spills from BBQ messes and prevents any liquid or grease from soaking through to damage or stain the surface below.
  • EASY TO CLEAN: When your grill mat gets dirty, simply power wash, hand wash or hose off.
  • ENVIRONMENTALLY SAFE : Phthalate and BPA free. Safe for your entire family, including your pets.

SMART HOME CHEF Grill Mat (36“ x 30”) Deck Protecting Gas Grill Splatter Mat to Protect Decks and Patios from Grease Splatter and Other Messes

SMART HOME CHEF Grill Mat (36“ x 30”) Deck Protecting Gas Grill Splatter Mat to Protect Decks and Patios from Grease Splatter and Other Messes
BESTSELLER NO. 10 in 2020
  • UNDER THE GRILL MAT:Measuring 36 inches by 30 inches, this protective mat stays safely in place under your grill to collect any spills and splatters.
  • SURFACE PROTECTION: Protect your deck, patio, or garage floor from water, sauce, grease, and oil. 100% recycled rubber provides a protective barrier without staining the surface underneath.
  • HEAT RESISTANT: Synthetic rubber provides heat resistance up to 500 degrees Fahrenheit.
  • EASY TO CLEAN: When ready to clean, simply rinse with soap and water or a garden hose.
  • Heavy-duty absorbent surface that protects decks from damage by trapping grease and other liquids associated with gas grilling

DIY Concrete Vanity Top

A narrative of a DIY project. Installing a concrete vanity and sink.

To fit the footprint, we drafted a countertop design four feet across the front that fits a 90 degree corner. We chose a roughly elliptical shape for the sink outline, about 16 inches measured on its long axis and about 10 inches on its short axis. Our sink has straight sides at 90 degrees to the countertop, rounded at the base on about a two-inch radius. The sink is about 8 inches deep. We used a standard 1.5 inch drain hole in the center of the bottom of the sink. We molded the top to accept a standard set of bathroom faucets. For the backsplash, we decided to tie in the ceramic tile used on the floor and tub surround to give the space added texture and depth.

We selected scrap wood for the primary mold material and particleboard for the base. We designed the mold as an open-casting mold so we could trowel the top smooth. We cut the particleboard to form a four-foot triangle on its long dimension for the corner base and cut the sink profile from it. We extended the sink ellipse profile by 1.5 inches to allow for the thickness of the concrete on the sides of the sink. To complete the mold, we nailed strips of scrap boards around the perimeter of the triangle to form the mold for a two-inch thick top. Around the elliptical hole for the sink we attached a set of faceted sides at right angles to the mold base to hold the concrete for the sides of the sink. We were fussy about the outer shell of the sink since it is not visible except when the vanity door is open. We attached a flat bottom to the sink polygon sides to complete the outer shell of the mold.

After building the mold, we created a core for the sink with an elliptical shape and smooth base curves on the sink interior out of Styrofoam. We built the eight inch deep sink core from layers of 1.5-inch thick high-density Styrofoam sheets. We cut each piece in the stack to the profile of the sink at its depth. We roughly cut the pieces to shape with a band saw and used hot-melt glue to glue the pieces together to form a stack. We then sculpted the form so the core extended to the top of the form boards, flush with the top surface of the countertop. We filled the seams and any tears from sculpting with several coats of drywall compound. We sanded the drywall compound to produce a fairly smooth surface on the core.

The last detail when preparing the mold were the holes for the drain and the faucets. Again, we used Styrofoam. We made cutouts of the proper size and glued them in place with hot-melt glue. Before pouring the concrete, we added scrap 9-gauge reinforcing wire and ¼-inch wire mesh as reinforcing materials.

We mixed the concrete by hand and shoveled it into the mold. We placed a generous layer of concrete for the sink base, and then pressed the Styrofoam sink core into place. To seat it, we wiggled the form. We then forced concrete around the floating Styrofoam core to build up the sink sides. Once done with the sides, we poured the top. We hand vibrated and troweled the concrete to settle it and achieve a smooth top finish.

We let the concrete cure for about three weeks before we removed the forms. Before we started polishing the sink, we filled minor filling of voids with a Portland and water filler mix.
.
We polished the sink with successively finer grits of silicon carbide sandpaper using a palm sander, taking care to wear safety goggles, respiratory masks, and to work in a well-ventilated area. We also kept pets out of the area.

Once we were happy with the sanding, we sealed the sink and vanity with two coats of marine epoxy, sanding between each coat. The thinner topcoat of epoxy produced an attractive, unique and serviceable vanity top and sink. When we totaled material costs for the project, the sink and vanity top cost us less than $75.00 and is something that draws rave reviews from friends whenever they use our newly renovated bathroom. We are working on the molds for our concrete, poured-in-place countertops as our next DYI project.

Related Bestselling Lists That You Might Like