10 Best Wet Look Patio Sealer
Updated on: December 2023
Best Wet Look Patio Sealer in 2023
Black Diamond Stoneworks Wet Look Natural Stone Sealer Provides Durable Gloss and Protection to: Slate, Concrete, Brick, Sandstone, Driveways, Garage Floors. Interior or Exterior. 1-Gallon.
Low Gloss Patio Paver Sealer, 1 gal - Clear Water-Based Sealant for Natural Stone Surfaces
- Invisible Water Repellent Protection - Milky white in appearance when first applied, and dries clear
- Non-Yellowing, Clear, Water-Based, VOC Compliant Acrylic Sealer - Low Odor and Easy Cleanup with Soap & Water
- Helps Prevent Color Loss & Weed Growth on Patio Stone Pavers
- Ready to Use - No Mixing Required - Easy to Apply with a Pump Up Garden Sprayer
- Provides a Low-Gloss Finish to Patio Paver Stones (Does not leave a high gloss finish on your paver stones but rather, a rich angular sheen that protects your pavers from fading and hardens, or “stabilizes” the joint sand. The amount of sheen will vary, based on the porosity of the pavers. High gloss finishes are not recommended on exterior paver stones as they can result in a slick, dangerous surface when wet.
1 Gallon DOMINATOR LG+ Wet Look, Low Gloss Paver Sealer - Covers up to 400 Square feet
- Restore the life and beauty of your surface with the ultimate color enhancement (wet look) with a low gloss finish for up to 5 years before the need to reseal.
- Protects against oil stains, mold, mildew and other spills while providing the ultimate UV protection on surfaces including concrete pavers, brick pavers, and decorative concrete. Not intended for stone or clay.
- Twice the coverage rate of your average sealer: 250-400 square feet per gallon, per coat.
- Breathe easy with our solvent free formula and no foul odors.
- Easy spray on application using our application guide and application videos.
Armor WL550 Matte Wet Look Enhancer Sealer Concrete, Brick, Pavers, Stone, and Slate
- Water repellent characteristics help to reduce deterioration caused by water absorption and freeze-thaw cycles
- Breathable, low VOC, single coat application.
5 GAL Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer
- The Armor AR350 is a breathable, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, and provide a long lasting, durable low gloss finish.
- The Armor AR350 is manufactured in the US and made from non-recycled resins.
- The Armor AR350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer.
- The Armor AR350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, cracking, spalling, and pitting.
- The Armor AR350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat.
KILZ L390201 Interior/Exterior Concrete, Brick, and Tile Liquid Masonry Sealer, Wet Look (High-Gloss), Clear, 1-Gallon, 1 gal, 4 l
- A good masonry sealer protects and beautifies concrete, brick, and other masonry surfaces while preserving and maintaining color and detail without fading, yellowing or changing color.
- KILZ Interior/Exterior Sealer is high-solid, non-yellowing acrylic-based formula that enhances coated and uncoated stone, tile, cement, and stucco surfaces with a high-gloss, wet-look finish.
- Use KILZ Liquid Masonry Sealer indoors and outdoors on masonry, stucco, concrete, tile, brick, aggregate, natural and artificial stone surfaces. Not for use in high moisture areas such as pool decks.
- This sealer can be applied with a brush, roller, high quality pad applicator, or high quality pump sprayer. The sealer dries within an hour and can be recoated in 4 hours.
- This is a 1-gallon can of KILZ Interior/Exterior Concrete, Brick, and Tile Clear Liquid Masonry Sealer with a wet-look finish. Covers 250-400 square feet per gallon depending on surface texture.
- All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint, rust, and all other foreign substances.
- KILZ Liquid Masonry Sealer can be brushed, rolled, or pump sprayed on. Do not thin.
- KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings.
1 Gallon DOMINATOR SG+ High Gloss Paver Sealer and Decorative Concrete (Wet Look) – Solvent Free, Twice The Coverage Rate (up to 400 sq ft)
- WET LOOK, HIGH GLOSS: Give yourself the gift of outstanding curb appeal with the DOMINATOR SG+. It restores faded colors, gives a high sheen on medium to darker pavers (medium gloss on light pavers), and improves the durability of your pavers or decorative concrete. Not intended for stone or clay brick pavers.
- PROTECT YOUR PAVER INVESTMENT: DOMINATOR SG+ is a breathable, film forming paver sealer that protects from oil stains, mold, mildew and other spills while providing incredible UV protection. DOMINATOR SG+ has low slip potential unlike most solvent based sealers.
- SOLVENT FREE: DOMINATOR SG+ provides the ultimate shine and color enhancement formula while also being solvent free and eco-friendly. Breathe easy while applying DOMINATOR SG+ since there are no foul odors. This makes for an easy cleanup and application process.
- COVERAGE RATE: Your money goes farther with this product with our amazing coverage rate up to 400 square feet per gallon, per coat, and up to 5 years before resealing. You will save money and time with reduced maintenance when you seal with DOMINATOR SG+.
- EASY SPRAY ON APPLICATION: Sealing with DOMINATOR SG+ paver sealer is quick and easy using our application guide, that is included with every purchase, as well as our application videos. For porous pavers that require two coats, allow 45 minutes between coats. Denser surfaces, like retaining walls, dense pavers and some previously sealed surfaces (with water-based sealer) may only require one coat of sealer.
ToughGloss Concrete Sealer (Semi-Gloss) - #1 Easy Use Wet Look Acrylic Sealer for Driveways, Patios, Garage Floors, Walkways, Paver, and Other Concrete Surfaces - Protect Your Concrete
- DARE TO COMPARE: Made with MicroEmulsion Technology, ToughGloss separates itself as the best semi-gloss concrete sealer on amazon. If you’re looking for a long lasting and professional quality “wet look” concrete sealer for decorative concrete and all other concrete surfaces, order ToughGloss today.
- STUNNING, PROTECTED CONCRETE: ToughGloss is a water-based, Indoor - Outdoor, pure acrylic sealer. It’s formulated to protect your concrete and withstand the elements(inside and out) so you don’t need to re-apply every year. ToughGloss professional concrete sealer is made with a wet look semi-gloss finish that is sure to make your neighbors jealous.
- TRANSFORM ANY CONCRETE SURFACE: ToughGloss is perfect for any concrete surfaces such as; Concrete driveways, sidewalks, floors,cultured stone, decorative masonry walls, Terrazzo, concrete pavers, precast units, and Stamped, stenciled, colored, acid stained concrete.
- EASY TO APPLY: Unlike other wet look sealers, ToughGloss is extremely easy to apply. Professional results can be easily achieved with a paint roller, brush, or sprayer. Can easily cover over previously applied solvent based, or water based systems. ToughGloss is compliant with all VOC regulations in the United States and Canada. ToughGloss dries to a clear, medium-gloss finish, but a higher gloss can be achieved with additional coats.
- 10 YEARS TOUGH PROMISE: We know it works and we’re giving you 10 years to try it out. If you don’t like it, just let us know and we will provide a full refund.
5 GAL Armor AR500 High Gloss Solvent Based Acrylic Concrete Sealer and Paver Sealer
- Penetrating high solids, breathable solvent based acrylic coating with unmatched bonding characteristics.
- Durable, long lasting. Stands up to abrasion, UV rays, hot tire pick up, hot and cold temperatures.
- Long lasting high gloss finish provides up to 2-5 years of life on a two coat application before the need for a recoat. Will bring out color in dull and faded surfaces.
- Can be used on poured concrete, stamped concrete, concrete pavers, aggregate, and more.
- Can be used on unsealed surfaces, or on surfaces previously sealed with a solvent based acrylic.
Armor WL550 1 GAL Matte Wet Look Sealer for Concrete, Brick, Pavers, and Stone
- Will darken the surface of unsealed concrete, brick, pavers, stone, slate, and porous masonry to make it look wet
- Will NOT leave behind a surface film, works entirely below the surface
- Water repellent characteristics help to reduce deterioration caused by water absorption and freeze-thaw cycles
- Will last for up to 5-7 years before the need to reseal
- Breathable, low VOC, single coat application.
Applying Driveway Sealer with a Paint Roller
Driveway sealing is a messy but easy task to perform for the homeowner.
Tools needed: nappy paint roller three quarter inch, long handle for roller, paint brush, putty knife, weed eater or edger, leaf blower or good stiff broom, garden hose or pressure washer, rubber gloves.
First thing to do is clear away any excess grass around the edges and also on the driveway itself. This can be done with a weed eater or edger. After this is done sweep drive way really good or use a leaf blower, this will remove excess debris. Now to really get it clean use a garden hose and hose the driveway down a day before you plan to seal it. If there are any grease spots clean these with a detergent designed for this then finish hosing.
Next thing to do is make sure it is not going to rain for at least 48 to 72 hours before beginning. If there are any major cracks in the driveway these can be patched with one of many products sold at your local hardware store. Some of these have a curing time before sealer can be applied so read instructions carefully.
Put on old clothes and shoes they should be disposable. Now one is ready to begin after mixing the sealer in the can. Take roller and extension and put the roller directly in the can and apply the sealer just like paint on a wall. If one can paint a wall one can paint sealer on. I have used this method repeatedly and have always had excellent results. I have used the squeegees and stiff brushes that are recommended for the job but end up using twice as much sealer as the roll on method. My guess would be the sealer companies came up with the squeegee and brush ideal to sell more sealer.
If any edges cannot be gotten with the roller use the paint brush to do the fine work. After finishing use paint thinner to clean sealer off the hands or arms. Wait 2 to 3 days before using the driveway and it should be ready for years of use and weather damage. Plus if you do it yourself using this method you will save hundreds of dollars in materials and labor costs.
